Publish Time: 2022-04-13 Origin: Site
The automatic screw feeder machine is mainly used to help the numerous and messy screws to be neatly arranged, so as to facilitate the subsequent screw locking and tightening operations, so the automatic screw arrangement machine is also called the automatic screw feeding machine. At present, automatic screw dispenser machines with good brands and good reputation can be widely used in the processing and manufacturing industries such as home appliances, machinery and children's toys that require the use of screws, saving a lot of labor and man-hours. So What preparations need to be done before using automatic screw feeder machine?
Here is the content list:
What preparations need to be done before using automatic screw feeder machine?
1. Install the electric bit head
The electric batch of the screw arrangement machine should be connected to the matching power supply box in advance, and then turn on the power box switch after plugging in the power supply. In addition, the electric batch should be stably suspended on the balancer or hook, and then the operation of installing the electric batch head of the automatic sorting machine can be carried out. Specifically, push up the sleeve at the end of the electric bit so that it is inserted into the main shaft along the direction of the shopping guide, and then loosen the sleeve so that the electric bit is firmly covered.
2. Prepare for trial operation
After the installation of the screw arrangement machine is completed, it needs to be tested for operation. At the beginning, you need to do some preparations for trial operation. You need to prepare screws, screw boxes, and corresponding screw fixing tools to adjust the electric batch to the correct direction by switching the direction control switch. Note that the direction control switch has different operating modes, FOR is clockwise, tighten the screw in the positive direction, REV is counterclockwise, and tighten the screw in the opposite direction.
3. Trial operation
After the test run preparation is confirmed, the test run operation of the screw feeder machine can be carried out to test the screws, and the torque can be adjusted at any time according to the actual situation during the operation, and the torque can be adjusted to the appropriate torque. Torque adjustment method: Rotate the torque fine-tuning ring upward, the larger the scale value is, the greater the torque will be. On the contrary, if the torque fine-tuning ring is rotated downward, the smaller the scale value, the smaller the force will be.
To sum up, the screw feeder machine needs to install the electric bit, prepare for the trial operation, and perform the trial operation before the official use. For more information about automatic screw feeder machine, please visit our official website: Http://www.bbamachine.com