Publish Time: 2022-08-17 Origin: Site
The automatic screw-driving machine is a typical type of mass production machinery, but sometimes it encounters a jam condition during processing, which will effect productivity. How to deal with this screw jam, people must understand how this jamming condition causes. Whether it is the problem of human actual operation or the problem of machinery itself. This kind of jamming problem is mostly caused by the residual product of the screw, generally caused by the flower head and the slippery tooth.
Here is the content:
First solution: If you find a slippery tooth during the operation of the automatic screwdriver, you must check whether the torque of the electric batch is suitable for the current range of locking screw torque. It is recommended to use a torque meter to check the torque again. In addition, check whether the screw size, specification model, and quality are all normal.
Second solution: If the automatic screw machine has a leakage of nails, then there will be a problem with the screw automatic feeder or the screw sensor switch. At this time, you must check whether the screw supply and demand balancer has delivered screws, take the screws by hand to see if everything is working normally, and check whether the light of the screw sensor switch is on. If any screws are not on, it means that the magnetic induction is abnormal.
Third solution: When you find that the automatic screwdriver has a floating lock, you must check whether the locking aspect ratio in the process settings in the data reaches the specific locking position of the screw, and whether the basic parameters of the locking rate are appropriate. In addition, it is also necessary to check whether the locked goods are defective.
According to the above three solutions, you can deal with the screw jam issue. For more information about automatic bolt tightening machine, screw feeding machine, automatic screw machine, welcome to contact us or visit our official website: Http://www.bbamachine.com/