What are the precautions for the use of automatic soldering machine？

Soldering is a highly technical job. Therefore, relevant experts have developed a fully automatic soldering machine to replace manual operation. This not only improves work efficiency but also guarantees the safety of operator. Using machine instead of manual operation is much more better in view of the complicate soldering process. However, there are still many points need pay attention in the process of using the automatic soldering robot.

Here is the content list:

What are the precautions for the use of automatic soldering machines?

What are the precautions for the use of automatic soldering machines

1. Good Preparations

In order to use the fully automatic soldering iron machine more smoothly, it is necessary to perform routine inspections before starting the machine, for example, check the key parts including the groove and tooth pattern of the wire feed roller. Whether the contact nozzle of the roller is worn out or not, etc. At the same time, ensure that there is enough lubricating oil inside at any time and do the related cleaning work.

2. Operated strictly according to specification

According to the soldering machine using specification to operate this soldering iron machine with soldering station to extend the service life, raise the soldering effect on products.

3. Good Ventilation

In order to allow harmful gases to be discharged in time, ventilation should be done. Such work should not be done in a confined space. If the workplace is not well ventilated, ventilation equipment should be installed so that it can be faster. Exhaust the gas. The wind speed in the welding area should be controlled within a certain range and not too high. If the wind is very strong, a windshield device should be adopted.

The above are the aspects included in the precautions for the use of the automatic soldering machine. In addition, it should be noted that the overload situation should be avoided to avoid the aging of the machine components. At the same time, note that the automatic soldering machine must be installed in a suitable environment, such as not being exposed to direct sunlight, wind or rain, and the place must not be violently shaken to avoid damage to the internal parts of the machine.

For more soldering information and automatic soldering robot price, welcome to contact us or visit our website https://www.bbamachine.com/.